Details
The Q567 can receive up to 8 DAB / DAB+ radio channels and convert them to a DVB-compatible MPEG-2 transport stream. Output can either be IP or DVB-ASI.
The device can be used to make locally received DAB / DAB+ radio programs available to the digital infrastructure of cable network operators.
Due to its DSP-based hardware, the Q567 DAB+ is compact (19" 1U housing) and highly energy-efficient (< 2W per stereo channel). Several ordering options are available to adapt the configuration to the customer´s requirements in a flexible way.
Specifications
DAB/ DAB+ Receiver:
DAB / DAB+ channels: Up to 8
Antenna input: One per channel
Input connector: F connector
Audio Decoding:
DAB, DAB+
Audio Encoding:
Algorithms:
ISO/IEC 11172-3, 13818-3 MPEG-1/-2 Layer II
ISO/IEC 13818-7 MPEG-2 AAC
ISO/IEC 14496-3 MPEG-4 AAC LC, HE-AAC,
HE-AAC V2
Bitrate:
All allowed bitrates as defined in the respective standards
Sampling Rate:
32 kHz, 48 kHz
Ancillary Data:
Programme Associated Data (X-PAD: DL, DL+) will be extracted from the DAB / DAB+ signal and converted to UECP. UECP data can then be embedded in MPEG audio data or transported as Private Stream inside the MPEG-2 Transport Stream.
Transport Protocols (Output):
Over IP:
Output of DVB MPEG-2 transport streams including
service information according to ETSI EN 300 468,
compliant to Pro-MPEG Code of Practice #3
release 2
Over ASI:
Output of DVB MPEG-2 transport streams including service information according to ETSI EN 300 468
Network Interfaces:
- 2 separate Ethernet interfaces (IEEE 802.3, RJ45) for data (IP streaming) and control (HTTP, SNMP, ancillary data)
- DVB-ASI (EN 50083-9) output (optional)
GPIO:
- 4 outputs (relay contacts)
- 8 inputs (photo couplers, 5 .. 24V)
System Configuration, Control and Monitoring:
- via Ethernet by accessing the on-system HTTP
- web server with any internet browser
- via Ethernet using SNMP
- via the front-panel keyboard and display
Power:
Supply voltage: 100 .. 240V +- 10%, 50 .. 60Hz
Optional: -48V DC
Integrated switching power supply
Power consumption: 30W
Power Supply Redundancy Option:
The optional power supply redundancy has the following features:
- Measurement of power supply voltages, values are provided via web GUI or SNMP
- SNMP trap generation on power supply fail
- Activation of switching contacts on power supply fail
- Automatic switch-over in case of power supply fail
Housing:
19" rack mount cabinet, 1U (1RU)
483 mm x 360 mm x 44 mm
Weight: 3,5 kg
Environment:
Working temp. 0°C to 45°C
Storage temp. –20°C to 70°C
Humidity 20% to 90% none condensing
Downloads
Q567 DAB+ DVB Transcoder (Datsheet, PDF, English)
Q567 DAB+ DVB Transcoder (Datenblatt, PDF, Deutsch)
This Product was added to our catalogue on Thursday 02 September, 2010.